4.1 A thin flat strip of material h

4.1 A thin flat strip of material having a constant rectangular cross section is mounted in the grips of a mechanical testing machine and monotonically loaded in tension while recording load. The ultimate strength of the material can be determined from the maximum load carried before failure. If the coupon strain is monitored with strain or displacement transducers then the stress-strain response of the material can be determined from which the ultimate tensile strain, tensile modulus of elasticity, Poisson’s ratio, and transition strain can be derived.
5. Significance and Use
5.1 This test method is designed to produce tensile property data for material specifications, research and development quality assurance, and structural design and analysis. Factors that influence the tensile response and should therefore be reported include the following: material, methods of material preparation and lay-Up, specimen stacking sequence, specimen preparation, specimen conditioning, environment of testing, specimen alignment and gripping, speed of testing, time at temperature, void content, and volume percent reinforcement. Properties, in the test direction , which may be obtained from this test method include the following:

Hasil (Bahasa Indonesia) 2:

4.1 Sebuah strip datar tipis bahan yang memiliki penampang persegi panjang konstan dipasang di genggaman mesin pengujian mekanik dan monoton dimuat dalam ketegangan saat merekam beban. Kekuatan utama dari material dapat ditentukan dari beban maksimum dilakukan sebelum kegagalan. Jika strain kupon dipantau dengan regangan atau perpindahan transduser maka respon tegangan-regangan material dapat ditentukan dari mana regangan tarik utama, modulus tarik elastisitas, rasio Poisson, dan ketegangan transisi dapat diturunkan.
5. Signifikansi dan Penggunaan
5.1 metode uji ini dirancang untuk menghasilkan data properti tarik untuk spesifikasi bahan, penelitian dan pengembangan kualitas jaminan, dan desain struktural dan analisis. Faktor-faktor yang mempengaruhi respon tarik dan karena itu harus dilaporkan meliputi: bahan, metode persiapan material dan lay-Up, spesimen susun urutan, spesimen persiapan, spesimen AC, lingkungan pengujian, spesimen keselarasan dan mencekam, kecepatan pengujian, waktu pada suhu, kadar rongga, dan penguatan persen volume. Properties, arah tes, yang dapat diperoleh dari metode pengujian ini meliputi berikut ini: