Partition recovery wizardPartition

Partition recovery wizard

Partition Recovery Wizard is an easy-to-use tool, with which you can recover volumes from the unallocated space on a basic MBR/GPT disk that were accidentally deleted or damaged due a hardware or software failure.

The Partition Recovery Wizard first attempts to recover volumes to the original pattern, i.e. logical volumes will be recovered as logical and primary as primary respectively. If the primary volume could not be recovered, on the contrary, it would be recovered to logical drive. Also, if the logical volume cannot be recovered to the original pattern, it will be recovered as primary.

To run Partition Recovery Wizard

Select Wizard > Partition recovery wizard from the top menu.
Recovering volumes in automatic mode

The automatic mode is easy to use and requires minimal effort. The program will try to find and recover all the deleted volumes on all basic disks.

1. In the Recovery mode window, choose Automatic.
2. In the Searching for Deleted Partitions window, Partition Recovery Wizard scans all the basic disks for deleted volumes. First, Partition Recovery Wizard checks your disks for unallocated space. If there is no unallocated space, you will be unable to move to the next step. If unallocated space is found, then the Partition Recovery Wizard starts searching for traces of deleted volumes.

The Partition Recovery Wizard checks the beginning of each side of every cylinder of every disk for boot sectors. A boot sector is the first sector of a volume that contains information about this volume, even after its deletion. Once a deleted volume is found, it will be displayed in the volume list(You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining disks are scanned. Then you can select volumes to recover. Only after the search is completed, the Next button becomes enabled, and you can proceed to the next window.

The program may find and display intersected volumes, you can choose either of them to recover, but only one of the intersected volumes can be recovered.

If the search is completed without result, you will be asked to close the Partition Recovery Wizard. If so, you can try to perform the search using the Complete method in Manual mode.

3. Click Next, the Recovered Volumes window displays the volumes to recover as a part of the hard disk volume structure.
4. Make sure that all the required volumes are properly placed in the hard disk structure, and then click Proceed to start recovering the volumes.

Recovering volumes in manual mode

The manual recovery mode lets you take full advantage of the volume recovery. You will be able to specify the searching method, disks to search on, and volumes to recover.

1. In the Recovery mode window, choose Manual.
2. In the Unallocated Space Selection window, select unallocated space on basic disks where the deleted volumes used to be located. You can select one of the unallocated spaces to search at a time.
3. In the Searching Method window, choose:

Fast – (recommended) checks the beginning of each side of every cylinder of the selected disks. It takes less time, and should find all deleted volumes in most cases. If no volumes are found in this method, you will be asked to either perform the search using Complete method or to finish search and close the Partition Recovery Wizard.
Complete – checks every sector on the selected disks for file system. It is more thorough and requires much more time to perform than the Fast method.

4. In the Searching for deleted volumes window, Partition Recovery Wizard scans all the selected unallocated space for deleted volumes. Once a deleted volume is found, it will be displayed in the volume list (You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining selected unallocated space is scanned. If no volumes are found, you will be asked to close the Partition Recovery Wizard.

The program can even find and display intersected volumes, that is, volumes that were created and deleted on the disk at different times. Moreover, every successive volume allocates space from the previously deleted volume, but not at the beginning of it. Only one of the intersected volumes can be recovered.

Unlike the automatic recovery mode, you do not need to wait until the whole search is finished as the manual mode. As soon as a located volume or multiple volumes are added to the list, you can select them for immediate recovery. The Search window displays the volumes to recover as a part of the hard disk volume structure, marking them with an icon in the upper right corner of its rectangle. Make certain that all the selected volumes are properly placed in the hard disk structure. Selecting a volume changes its status to Undeleted and enables the Next button.

5. Click Proceed to start recovering the volumes.

Partition recovery wizard

Partition Recovery Wizard is an easy-to-use tool, with which you can recover volumes from the unallocated space on a basic MBR/GPT disk that were accidentally deleted or damaged due a hardware or software failure.

The Partition Recovery Wizard first attempts to recover volumes to the original pattern, i.e. logical volumes will be recovered as logical and primary as primary respectively. If the primary volume could not be recovered, on the contrary, it would be recovered to logical drive. Also, if the logical volume cannot be recovered to the original pattern, it will be recovered as primary.

To run Partition Recovery Wizard

Select Wizard > Partition recovery wizard from the top menu.
Recovering volumes in automatic mode

The automatic mode is easy to use and requires minimal effort. The program will try to find and recover all the deleted volumes on all basic disks.

1. In the Recovery mode window, choose Automatic.
 2. In the Searching for Deleted Partitions window, Partition Recovery Wizard scans all the basic disks for deleted volumes. First, Partition Recovery Wizard checks your disks for unallocated space. If there is no unallocated space, you will be unable to move to the next step. If unallocated space is found, then the Partition Recovery Wizard starts searching for traces of deleted volumes.

The Partition Recovery Wizard checks the beginning of each side of every cylinder of every disk for boot sectors. A boot sector is the first sector of a volume that contains information about this volume, even after its deletion. Once a deleted volume is found, it will be displayed in the volume list(You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining disks are scanned. Then you can select volumes to recover. Only after the search is completed, the Next button becomes enabled, and you can proceed to the next window.

The program may find and display intersected volumes, you can choose either of them to recover, but only one of the intersected volumes can be recovered.

If the search is completed without result, you will be asked to close the Partition Recovery Wizard. If so, you can try to perform the search using the Complete method in Manual mode.

3. Click Next, the Recovered Volumes window displays the volumes to recover as a part of the hard disk volume structure.
 4. Make sure that all the required volumes are properly placed in the hard disk structure, and then click Proceed to start recovering the volumes.

Recovering volumes in manual mode

The manual recovery mode lets you take full advantage of the volume recovery. You will be able to specify the searching method, disks to search on, and volumes to recover.

1. In the Recovery mode window, choose Manual.
 2. In the Unallocated Space Selection window, select unallocated space on basic disks where the deleted volumes used to be located. You can select one of the unallocated spaces to search at a time.
 3. In the Searching Method window, choose:

Fast – (recommended) checks the beginning of each side of every cylinder of the selected disks. It takes less time, and should find all deleted volumes in most cases. If no volumes are found in this method, you will be asked to either perform the search using Complete method or to finish search and close the Partition Recovery Wizard.
Complete – checks every sector on the selected disks for file system. It is more thorough and requires much more time to perform than the Fast method.

4. In the Searching for deleted volumes window, Partition Recovery Wizard scans all the selected unallocated space for deleted volumes. Once a deleted volume is found, it will be displayed in the volume list (You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining selected unallocated space is scanned. If no volumes are found, you will be asked to close the Partition Recovery Wizard.

The program can even find and display intersected volumes, that is, volumes that were created and deleted on the disk at different times. Moreover, every successive volume allocates space from the previously deleted volume, but not at the beginning of it. Only one of the intersected volumes can be recovered.

Unlike the automatic recovery mode, you do not need to wait until the whole search is finished as the manual mode. As soon as a located volume or multiple volumes are added to the list, you can select them for immediate recovery. The Search window displays the volumes to recover as a part of the hard disk volume structure, marking them with an icon in the upper right corner of its rectangle. Make certain that all the selected volumes are properly placed in the hard disk structure. Selecting a volume changes its status to Undeleted and enables the Next button.

5. Click Proceed to start recovering the volumes.

0/5000

Dari: -

Ke: -

Hasil (Bahasa Indonesia) 1: [Salinan]

Disalin!

Partition recovery wizardPartition Recovery Wizard is an easy-to-use tool, with which you can recover volumes from the unallocated space on a basic MBR/GPT disk that were accidentally deleted or damaged due a hardware or software failure.The Partition Recovery Wizard first attempts to recover volumes to the original pattern, i.e. logical volumes will be recovered as logical and primary as primary respectively. If the primary volume could not be recovered, on the contrary, it would be recovered to logical drive. Also, if the logical volume cannot be recovered to the original pattern, it will be recovered as primary.To run Partition Recovery WizardSelect Wizard > Partition recovery wizard from the top menu.Recovering volumes in automatic modeThe automatic mode is easy to use and requires minimal effort. The program will try to find and recover all the deleted volumes on all basic disks. 1. In the Recovery mode window, choose Automatic. 2. In the Searching for Deleted Partitions window, Partition Recovery Wizard scans all the basic disks for deleted volumes. First, Partition Recovery Wizard checks your disks for unallocated space. If there is no unallocated space, you will be unable to move to the next step. If unallocated space is found, then the Partition Recovery Wizard starts searching for traces of deleted volumes.The Partition Recovery Wizard checks the beginning of each side of every cylinder of every disk for boot sectors. A boot sector is the first sector of a volume that contains information about this volume, even after its deletion. Once a deleted volume is found, it will be displayed in the volume list(You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining disks are scanned. Then you can select volumes to recover. Only after the search is completed, the Next button becomes enabled, and you can proceed to the next window.The program may find and display intersected volumes, you can choose either of them to recover, but only one of the intersected volumes can be recovered.If the search is completed without result, you will be asked to close the Partition Recovery Wizard. If so, you can try to perform the search using the Complete method in Manual mode. 3. Click Next, the Recovered Volumes window displays the volumes to recover as a part of the hard disk volume structure. 4. Make sure that all the required volumes are properly placed in the hard disk structure, and then click Proceed to start recovering the volumes.Recovering volumes in manual modeThe manual recovery mode lets you take full advantage of the volume recovery. You will be able to specify the searching method, disks to search on, and volumes to recover. 1. In the Recovery mode window, choose Manual. 2. In the Unallocated Space Selection window, select unallocated space on basic disks where the deleted volumes used to be located. You can select one of the unallocated spaces to search at a time. 3. In the Searching Method window, choose:Fast – (recommended) checks the beginning of each side of every cylinder of the selected disks. It takes less time, and should find all deleted volumes in most cases. If no volumes are found in this method, you will be asked to either perform the search using Complete method or to finish search and close the Partition Recovery Wizard.Complete – checks every sector on the selected disks for file system. It is more thorough and requires much more time to perform than the Fast method. 4. In the Searching for deleted volumes window, Partition Recovery Wizard scans all the selected unallocated space for deleted volumes. Once a deleted volume is found, it will be displayed in the volume list (You can double click the volume to explore the content to see whether it is the one you need to recover). The search will, however, continue until all the remaining selected unallocated space is scanned. If no volumes are found, you will be asked to close the Partition Recovery Wizard.The program can even find and display intersected volumes, that is, volumes that were created and deleted on the disk at different times. Moreover, every successive volume allocates space from the previously deleted volume, but not at the beginning of it. Only one of the intersected volumes can be recovered.Unlike the automatic recovery mode, you do not need to wait until the whole search is finished as the manual mode. As soon as a located volume or multiple volumes are added to the list, you can select them for immediate recovery. The Search window displays the volumes to recover as a part of the hard disk volume structure, marking them with an icon in the upper right corner of its rectangle. Make certain that all the selected volumes are properly placed in the hard disk structure. Selecting a volume changes its status to Undeleted and enables the Next button. 5. Click Proceed to start recovering the volumes.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 2:[Salinan]

Disalin!

Pemulihan partisi Wizard Partisi Recovery Wizard adalah mudah digunakan alat, dengan mana Anda dapat memulihkan volume dari ruang yang tidak terisi pada dasar MBR / GPT disk yang tidak sengaja terhapus atau rusak karena kegagalan perangkat keras atau perangkat lunak. Partisi Recovery Wizard mencoba untuk memulihkan volume pola asli, yaitu volume logis akan pulih seperti logis dan utama sebagai dasar masing-masing. Jika volume primer tidak dapat dipulihkan, sebaliknya, itu akan pulih ke drive logis. Juga, jika volume logis tidak dapat dipulihkan dengan pola asli, itu akan pulih seperti primer. Untuk menjalankan Partition Recovery Wizard Pilih Wisaya> Wizard pemulihan Partisi dari menu atas. Memulihkan volume dalam mode otomatis Modus otomatis mudah digunakan dan membutuhkan usaha minimal. Program ini akan mencoba untuk menemukan dan memulihkan semua dihapus volume pada semua disk dasar. 1. Dalam Pemulihan modus window, pilih Automatic. 2. Dalam pencarian untuk jendela Dihapus Partisi, Partisi Recovery Wizard memindai semua disk dasar untuk volume dihapus. Pertama, Partisi Recovery Wizard memeriksa disk Anda untuk ruang yang tidak terisi. Jika tidak ada ruang yang tidak terisi, Anda tidak akan dapat bergerak ke langkah berikutnya. Jika ruang yang tidak terisi ditemukan, maka partisi Recovery Wizard mulai mencari jejak volume dihapus. Partisi Recovery Wizard memeriksa awal setiap sisi setiap silinder setiap disk untuk boot sector. Sebuah boot sector adalah sektor pertama dari volume yang berisi informasi tentang buku ini, bahkan setelah penghapusan nya. Setelah volume dihapus ditemukan, maka akan ditampilkan dalam daftar volume (Anda dapat klik dua kali volume untuk menjelajahi konten untuk melihat apakah itu adalah yang Anda butuhkan untuk memulihkan). Pencarian akan, bagaimanapun, terus sampai semua disk yang tersisa di-scan. Kemudian Anda dapat memilih untuk memulihkan volume. Hanya setelah pencarian selesai, tombol Next menjadi diaktifkan, dan Anda dapat melanjutkan ke jendela berikutnya. Program ini dapat mencari dan menampilkan berpotongan volume, Anda dapat memilih salah satu dari mereka untuk pulih, tetapi hanya satu dari volume berpotongan dapat dipulihkan . Jika pencarian selesai tanpa hasil, Anda akan diminta untuk menutup Partisi Recovery Wizard. Jika demikian, Anda dapat mencoba untuk melakukan pencarian dengan menggunakan metode Lengkap dalam mode Manual. 3. Klik Next, jendela Volume Dipulihkan menampilkan volume untuk memulihkan sebagai bagian dari struktur volume disk keras. 4. Pastikan bahwa semua volume yang diperlukan dengan benar ditempatkan dalam struktur hard disk, dan kemudian klik Lanjutkan untuk mulai memulihkan volume. Memulihkan volume dalam mode manual Modus recovery manual, Anda dapat mengambil keuntungan penuh dari pemulihan volume. Anda akan dapat menentukan metode pencarian, disk untuk mencari, dan volume untuk pulih. 1. Dalam Pemulihan modus window, pilih Manual. 2. Dalam dialokasikan Ruang Seleksi window, pilih ruang yang tidak terisi pada disk dasar di mana volume yang dihapus dulu terletak. Anda dapat memilih salah satu ruang yang tidak terisi untuk mencari pada satu waktu. 3. Pada jendela Metode Mencari, pilih: Cepat - (dianjurkan) memeriksa setiap awal sisi setiap silinder disk yang dipilih. Dibutuhkan sedikit waktu, dan harus menemukan semua volume dihapus dalam banyak kasus. Jika tidak ada volume ditemukan dalam metode ini, Anda akan diminta untuk baik melakukan pencarian menggunakan metode Lengkap atau untuk menyelesaikan pencarian dan menutup Partisi Recovery Wizard. Lengkap - cek setiap sektor pada disk yang dipilih untuk sistem file. Hal ini lebih menyeluruh dan membutuhkan lebih banyak waktu untuk melakukan daripada metode cepat. 4. Dalam pencarian untuk dihapus jendela volume, Partisi Recovery Wizard memindai semua ruang yang tidak terisi yang dipilih untuk volume dihapus. Setelah volume dihapus ditemukan, maka akan ditampilkan dalam daftar volume (Anda dapat klik dua kali volume untuk menjelajahi konten untuk melihat apakah itu adalah yang Anda butuhkan untuk memulihkan). Pencarian akan, bagaimanapun, terus sampai semua ruang yang tidak terisi sisa dipilih dipindai. Jika tidak ada volume yang ditemukan, Anda akan diminta untuk menutup Partisi Recovery Wizard. Program ini bahkan dapat menemukan dan menampilkan berpotongan volume, yaitu volume yang diciptakan dan dihapus pada disk pada waktu yang berbeda. Selain itu, setiap volume yang berturut-turut mengalokasikan ruang dari volume sebelumnya dihapus, tapi tidak di awal itu. Hanya satu dari volume berpotongan dapat dipulihkan. Berbeda dengan modus pemulihan otomatis, Anda tidak perlu menunggu sampai seluruh pencarian selesai sebagai mode manual. Begitu volume terletak atau beberapa volume ditambahkan ke dalam daftar, Anda bisa memilih mereka untuk pemulihan segera. Pencarian window menampilkan volume untuk memulihkan sebagai bagian dari struktur volume disk keras, menandai mereka dengan ikon di sudut kanan atas persegi panjang tersebut. Pastikan bahwa semua volume yang dipilih akan benar ditempatkan dalam struktur hard disk. Memilih volume berubah statusnya menjadi Dihapus dan memungkinkan tombol Next. 5. Klik Lanjut untuk memulai memulihkan volume.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 3:[Salinan]

Disalin!

Sedang diterjemahkan, harap tunggu..

Bahasa lainnya

Dukungan alat penerjemahan: Afrikans, Albania, Amhara, Arab, Armenia, Azerbaijan, Bahasa Indonesia, Basque, Belanda, Belarussia, Bengali, Bosnia, Bulgaria, Burma, Cebuano, Ceko, Chichewa, China, Cina Tradisional, Denmark, Deteksi bahasa, Esperanto, Estonia, Farsi, Finlandia, Frisia, Gaelig, Gaelik Skotlandia, Galisia, Georgia, Gujarati, Hausa, Hawaii, Hindi, Hmong, Ibrani, Igbo, Inggris, Islan, Italia, Jawa, Jepang, Jerman, Kannada, Katala, Kazak, Khmer, Kinyarwanda, Kirghiz, Klingon, Korea, Korsika, Kreol Haiti, Kroat, Kurdi, Laos, Latin, Latvia, Lituania, Luksemburg, Magyar, Makedonia, Malagasi, Malayalam, Malta, Maori, Marathi, Melayu, Mongol, Nepal, Norsk, Odia (Oriya), Pashto, Polandia, Portugis, Prancis, Punjabi, Rumania, Rusia, Samoa, Serb, Sesotho, Shona, Sindhi, Sinhala, Slovakia, Slovenia, Somali, Spanyol, Sunda, Swahili, Swensk, Tagalog, Tajik, Tamil, Tatar, Telugu, Thai, Turki, Turkmen, Ukraina, Urdu, Uyghur, Uzbek, Vietnam, Wales, Xhosa, Yiddi, Yoruba, Yunani, Zulu, Bahasa terjemahan.