Figure 8. X-ray CT system used for

Figure 8. X-ray CT system used for sandwich structure inspections. 1

60 times. The X-ray source voltage can be varied from 25 to 225 kilovolts. The detector array size is 2,000 x 2,000 with a 200µ pitch. The sample can be manipulated with 5 axes of freedom, while continuously viewing the image on a monitor. Defects can be rapidly located, zooming in for detailed analysis. The system is contained in a radiation enclosure, with X-ray, manipulator and imaging controls housed in a separate control console. Sample sizes can range up to 25.4 x 25.4 cm.

Comparison of Thermography to Computed Tomography X-ray.
Based on the 2-D modeling results from sections 3.2 and 4.1, an early time window can be used for detection of defects within the composite face sheet. A late time window can be used to detect a face sheet to core disbond. Shown in Figure 9 is an early time (0.33 – 1.5 seconds) PCA image of a composite honeycomb sample with impact damage delamination defects (7 total impacts). The impact damage shows up as lighter.

Figure 8. X-ray CT system used for sandwich structure inspections. 1

60 times. The X-ray source voltage can be varied from 25 to 225 kilovolts. The detector array size is 2,000 x 2,000 with a 200µ pitch. The sample can be manipulated with 5 axes of freedom, while continuously viewing the image on a monitor. Defects can be rapidly located, zooming in for detailed analysis. The system is contained in a radiation enclosure, with X-ray, manipulator and imaging controls housed in a separate control console. Sample sizes can range up to 25.4 x 25.4 cm.

Comparison of Thermography to Computed Tomography X-ray. 
Based on the 2-D modeling results from sections 3.2 and 4.1, an early time window can be used for detection of defects within the composite face sheet. A late time window can be used to detect a face sheet to core disbond. Shown in Figure 9 is an early time (0.33 – 1.5 seconds) PCA image of a composite honeycomb sample with impact damage delamination defects (7 total impacts). The impact damage shows up as lighter.

1037/5000

Dari: Inggris

Ke: Bahasa Indonesia

Hasil (Bahasa Indonesia) 1: [Salinan]

Disalin!

Figure 8. X-ray CT system used for sandwich structure inspections. 160 times. The X-ray source voltage can be varied from 25 to 225 kilovolts. The detector array size is 2,000 x 2,000 with a 200µ pitch. The sample can be manipulated with 5 axes of freedom, while continuously viewing the image on a monitor. Defects can be rapidly located, zooming in for detailed analysis. The system is contained in a radiation enclosure, with X-ray, manipulator and imaging controls housed in a separate control console. Sample sizes can range up to 25.4 x 25.4 cm. Comparison of Thermography to Computed Tomography X-ray. Based on the 2-D modeling results from sections 3.2 and 4.1, an early time window can be used for detection of defects within the composite face sheet. A late time window can be used to detect a face sheet to core disbond. Shown in Figure 9 is an early time (0.33 – 1.5 seconds) PCA image of a composite honeycomb sample with impact damage delamination defects (7 total impacts). The impact damage shows up as lighter.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 2:[Salinan]

Disalin!

Gambar 8. X-ray CT sistem yang digunakan untuk struktur sandwich inspeksi. 1 60 kali. Tegangan sumber sinar-X dapat bervariasi 25-225 kilovolt. Ukuran detektor array 2.000 x 2.000 dengan lapangan 200μ. Sampel dapat dimanipulasi dengan 5 sumbu kebebasan, sambil terus melihat gambar pada monitor. Cacat dapat cepat terletak, zoom in untuk analisis rinci. Sistem ini terkandung dalam kandang radiasi, dengan X-ray, manipulator dan pencitraan kontrol bertempat di konsol kontrol terpisah. Ukuran sampel dapat berkisar hingga 25,4 x 25,4 cm. Perbandingan Thermography untuk Computed Tomography X-ray. Berdasarkan 2-D hasil pemodelan dari bagian 3.2 dan 4.1, jendela waktu awal dapat digunakan untuk mendeteksi cacat dalam wajah komposit sheet. Sebuah akhir jendela waktu dapat digunakan untuk mendeteksi lembar muka dengan inti disbond. Ditunjukkan pada Gambar 9 adalah waktu awal (0,33-1,5 detik) image PCA dari sampel sarang lebah komposit dengan cacat delaminasi dampak kerusakan (7 Total dampak). The dampak kerusakan muncul sebagai lebih ringan.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 3:[Salinan]

Disalin!

Sedang diterjemahkan, harap tunggu..

Bahasa lainnya

Dukungan alat penerjemahan: Afrikans, Albania, Amhara, Arab, Armenia, Azerbaijan, Bahasa Indonesia, Basque, Belanda, Belarussia, Bengali, Bosnia, Bulgaria, Burma, Cebuano, Ceko, Chichewa, China, Cina Tradisional, Denmark, Deteksi bahasa, Esperanto, Estonia, Farsi, Finlandia, Frisia, Gaelig, Gaelik Skotlandia, Galisia, Georgia, Gujarati, Hausa, Hawaii, Hindi, Hmong, Ibrani, Igbo, Inggris, Islan, Italia, Jawa, Jepang, Jerman, Kannada, Katala, Kazak, Khmer, Kinyarwanda, Kirghiz, Klingon, Korea, Korsika, Kreol Haiti, Kroat, Kurdi, Laos, Latin, Latvia, Lituania, Luksemburg, Magyar, Makedonia, Malagasi, Malayalam, Malta, Maori, Marathi, Melayu, Mongol, Nepal, Norsk, Odia (Oriya), Pashto, Polandia, Portugis, Prancis, Punjabi, Rumania, Rusia, Samoa, Serb, Sesotho, Shona, Sindhi, Sinhala, Slovakia, Slovenia, Somali, Spanyol, Sunda, Swahili, Swensk, Tagalog, Tajik, Tamil, Tatar, Telugu, Thai, Turki, Turkmen, Ukraina, Urdu, Uyghur, Uzbek, Vietnam, Wales, Xhosa, Yiddi, Yoruba, Yunani, Zulu, Bahasa terjemahan.