A strain relief, or boot, is typica

A strain relief, or boot, is typically placed over the cable jacket and secured to the connector body. The boot is generally made of an elastic material that slides over the connector body. Friction between the boot and the connector body holds the boot in place. The boot prevents the cable from being pulled at too great an angle against the connector, as shown in Figure 26.6.

Fiber-optic connectors, commonly referred to as plugs, mate with other connectors or receptacles. The ferrule of the connector is the plug, and when two connectors mate, their ferrules are aligned with a sleeve that is typically called a mating sleeve or an alignment sleeve. Figure 26.7 is a photograph of an LC alignment sleeve that mates two LC connectors.

Hasil (Bahasa Indonesia) 2:

Sebuah strain relief, atau boot, biasanya ditempatkan di atas jaket kabel dan diamankan ke tubuh konektor. Boot umumnya terbuat dari bahan elastis yang slide atas tubuh konektor. Gesekan antara boot dan tubuh konektor memegang boot di tempat. Boot mencegah kabel dari ditarik pada terlalu besar sudut terhadap konektor, seperti yang ditunjukkan pada Gambar 26.6. konektor serat optik, biasanya disebut sebagai colokan, kawin dengan konektor atau wadah lainnya. Ferrule konektor plug, dan ketika dua konektor kawin, ferrules mereka selaras dengan lengan yang biasanya disebut lengan kawin atau lengan keselarasan. Gambar 26.7 adalah foto alignment lengan LC yang Mates dua konektor LC.