The main components of a CNC system

The main components of a CNC system are shown in Figure 1-1. These are:
1. A Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) program. The part
designer uses the CAD/CAM program to generate an output file called a part program. The
part program, often written in “GCode,” describes the machine steps required to make the
desired part. You can also create a GCode program manually.
2. A file transfer medium such as a USB flash drive, floppy disk, or network link, transfers the
output of the CAD/CAM program to a Machine Controller.
3. A Machine Controller. The Machine Controller reads and interprets the part program to control
the tool which will cut the workpiece. Mach3, running on a PC, performs the Machine
Controller function and send signals to the Drives.
1-3
4. The Drives. The signals from the Machine Controller are amplified by the Drives so they are
powerful enough and suitably timed to operate the motors driving the machine tool axes.
5. The machine tool. The axes of the machine are moved by screws, racks or belts which are
powered by servo motors or stepper motors.

The main components of a CNC system are shown in Figure 1-1. These are:
1. A Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) program. The part
designer uses the CAD/CAM program to generate an output file called a part program. The
part program, often written in “GCode,” describes the machine steps required to make the
desired part. You can also create a GCode program manually.
2. A file transfer medium such as a USB flash drive, floppy disk, or network link, transfers the
output of the CAD/CAM program to a Machine Controller.
3. A Machine Controller. The Machine Controller reads and interprets the part program to control
the tool which will cut the workpiece. Mach3, running on a PC, performs the Machine
Controller function and send signals to the Drives. 
1-3
4. The Drives. The signals from the Machine Controller are amplified by the Drives so they are
powerful enough and suitably timed to operate the motors driving the machine tool axes.
5. The machine tool. The axes of the machine are moved by screws, racks or belts which are
powered by servo motors or stepper motors.

0/5000

Dari: -

Ke: -

Hasil (Bahasa Indonesia) 1: [Salinan]

Disalin!

The main components of a CNC system are shown in Figure 1-1. These are:1. A Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) program. The partdesigner uses the CAD/CAM program to generate an output file called a part program. Thepart program, often written in “GCode,” describes the machine steps required to make thedesired part. You can also create a GCode program manually.2. A file transfer medium such as a USB flash drive, floppy disk, or network link, transfers theoutput of the CAD/CAM program to a Machine Controller.3. A Machine Controller. The Machine Controller reads and interprets the part program to controlthe tool which will cut the workpiece. Mach3, running on a PC, performs the MachineController function and send signals to the Drives. 1-34. The Drives. The signals from the Machine Controller are amplified by the Drives so they arepowerful enough and suitably timed to operate the motors driving the machine tool axes.5. The machine tool. The axes of the machine are moved by screws, racks or belts which arepowered by servo motors or stepper motors.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 2:[Salinan]

Disalin!

Komponen utama dari sistem CNC ditunjukkan pada Gambar 1-1. Ini adalah:
1. Program Manufacturing (CAD / CAM) A Computer Aided Design / Computer Aided. Bagian
desainer menggunakan program CAD / CAM untuk menghasilkan output file disebut program bagian. The
program paruh, sering ditulis dalam "Gcode," menjelaskan langkah-langkah mesin diperlukan untuk membuat
bagian yang diinginkan. Anda juga dapat membuat program Gcode manual.
2. Sebuah media transfer file seperti USB flash drive, floppy disk, atau link jaringan, transfer
output program CAD / CAM untuk mesin Controller.
3. Sebuah Pengendali Mesin. Mesin Pengendali membaca dan menafsirkan program bagian untuk mengontrol
alat yang akan memotong benda kerja. Mach3, berjalan pada PC, melakukan Machine
fungsi Controller dan mengirim sinyal ke Drives.
1-3
4. The Drives. Sinyal dari Mesin Pengendali diperkuat oleh Drives sehingga mereka
cukup kuat dan sesuai waktunya untuk mengoperasikan motor penggerak sumbu alat mesin.
5. Alat mesin. Sumbu mesin digerakkan oleh sekrup, rak atau sabuk yang
didukung oleh motor servo atau motor stepper.

Sedang diterjemahkan, harap tunggu..

Hasil (Bahasa Indonesia) 3:[Salinan]

Disalin!

Sedang diterjemahkan, harap tunggu..

Bahasa lainnya

Dukungan alat penerjemahan: Afrikans, Albania, Amhara, Arab, Armenia, Azerbaijan, Bahasa Indonesia, Basque, Belanda, Belarussia, Bengali, Bosnia, Bulgaria, Burma, Cebuano, Ceko, Chichewa, China, Cina Tradisional, Denmark, Deteksi bahasa, Esperanto, Estonia, Farsi, Finlandia, Frisia, Gaelig, Gaelik Skotlandia, Galisia, Georgia, Gujarati, Hausa, Hawaii, Hindi, Hmong, Ibrani, Igbo, Inggris, Islan, Italia, Jawa, Jepang, Jerman, Kannada, Katala, Kazak, Khmer, Kinyarwanda, Kirghiz, Klingon, Korea, Korsika, Kreol Haiti, Kroat, Kurdi, Laos, Latin, Latvia, Lituania, Luksemburg, Magyar, Makedonia, Malagasi, Malayalam, Malta, Maori, Marathi, Melayu, Mongol, Nepal, Norsk, Odia (Oriya), Pashto, Polandia, Portugis, Prancis, Punjabi, Rumania, Rusia, Samoa, Serb, Sesotho, Shona, Sindhi, Sinhala, Slovakia, Slovenia, Somali, Spanyol, Sunda, Swahili, Swensk, Tagalog, Tajik, Tamil, Tatar, Telugu, Thai, Turki, Turkmen, Ukraina, Urdu, Uyghur, Uzbek, Vietnam, Wales, Xhosa, Yiddi, Yoruba, Yunani, Zulu, Bahasa terjemahan.