32. “Connect the audio cable (if ap

32. “Connect the audio cable (if applicable).”
The sentence implies ….
A. You may not turn the computer on before connecting the cable.
B. Your CD-ROM may not work properly if you do not connect the cable.
C. It is not necessary to connect the cable if it is not valid
D. Reinstall the CD-ROM if you have not connected the cable.

33. “Connect the IDE cable to the drive.”
The word 'drive' in the sentence refers to ….
A. CD-ROM
B. jumper
C. motherboard
D. computer

34. “Carefully slide the drive into the empty bay and mount it.”
The word 'bay' in the sentence is similar in meaning to ….
A. jumper
B. cable
C. button
D. compartment

35. Plug your computer back to power outlet and then turn the power on.
The word 'outlet' in the sentence is similar in meaning to ….
A. button
B. channel
C. cable
D. port

Text 9
The following text is for questions number 36 to 38.

Printing a File

1.Turn the printer on.
2.Open the file that you want to print.
3.Click “File”. And then click “print”.
4.Check if the printer’s name is the same as the one you are going to use. If it is not the same, then search for the name of the printer that you are going to use by clicking on the small triangle or arrow beside it.
5.Click “pages” and then type the pages that you want to print.
6.Select the number of copies that you want to print by clicking on the arrows beside it.
7.Click “OK” or “Print”.

36. The text is about how to ….
A. save a file C. print a file
B. open a file D. delete a file

37. How do we open the file?
A. Just by turning the printer on.
B. Just by clicking the “File”
C. Just by clicking “Print”
D. Just by typing the pages

38. What do we have to do if the printer's name is not the same as the one we are going to use?
A. Search for the name of the printer that we are going to use by clicking on the small triangle or arrow beside it
B. Select the number of copies that you want to print by clicking on the arrows beside it.
C. Click “pages” and then type the pages that you want to print.
D. Turn the printer off.

Text 10
The following text is for questions number 39 to 43

Connecting JetFlash (flash disk) to a Computer

1.Plug the JetFlash directly into an available USB port on your desktop or notebook computer.
2. When the JetFlash is successfully connected to a computer, the JetFlash ‘s LED will light up. A Removable Disk drive* with a newly assigned drive letter indicating the JetFlash will appear in the My Computer window. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray
3.After the JetFlash is connected to the computer, you can start transferring data to the JetFlash Just drag and drop files or folders directly onto the Removable Disk icon that represents the JetFlash .

39. What does the text tell us about?
A. The steps to install the JetFlash .
B. The steps to uninstall the JetFlash .
C. The steps to install QuickMenu of the JetFlash.
D. The steps to copy files and folders to the JetFlash.

40. Where do we plug the flash disk?
A. Into the IDE port.
B. Into the power slot.
C. Into the USB port.
D. Into the power outlet.

41. What indicates that the JetFlash is successfully connected to your computer?
A. The JetFlash ‘s LED will light up.
B. The computer is restarted automatically.
C. The computer is removing the data to the JetFlash .
D. The Auto Log In of the JetFlash is running.

42. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray.”
The sentence implies …
A. If the icons do not appear, you must reinstall the JetFlash elite.
B. If the icons do not appear, you must check your hardware configuration.
C. In some computers with different operating systems, the icons may not appear.
D. You must install the icons so that the icons may appear in the Windows System Tray.

43. “In addition, a Removable Hardware icon and an icon QuickMenu (provided you setup JetFlash elite) will appear in the Windows System Tray.”
The word 'icon' in the sentence is similar in meaning to ....
A. port
B. symbol
C. cable
D. drive

Text 11
The following text is for question number 44.

CD BOWLS

Materials:
Old CDs
Hair dryer/oven
Metal bowl
Glue
Small saucer/something to cover the CD hole

Directions:
First, place the CD in a metal bowl and heat it with a hair dryer. Or put it in the oven
on low heat. Then, bend the CD softly when it softens. After that, let it cool off.
Finally, glue a small plastic saucer or anything to cover the hole.

44. What is the hair dryer for?
A. to place the CD
B. To bend the CD
C. Yo cool off the CD
D. To heat the CD

Text 12
The following text is for questions number 45 and 46.

Tie Dyeing Old T-shirt

Things you need:
Old cotton T-shirt
Large thread or rubber band
Cloth dye
Bucket

Steps:
1.Wash the cotton T-shirt.
2.Place the wet shirt flat on the work surface.
3.Tie knots in the T-shirt, or twist it and secure the folds with rubber bands or heavy-duty thread.
4.Mix 1/2 c. liquid dye (or 1 package powdered dye) in 1 qt. hot water. Dissolve 5 tbsp. table salt in the mixture.
5.Let the mixture cool to room temperature.
6.Put the entire shirt in the dye and let it soak for at least 20 minutes.
7.Rinse the shirt in cold water until the water runs clear.
8.Undo the knots and rinse the shirt again.
9.Hang the shirt to dry, under the sun.


45. How must we place the wet T-shirt?
A. inside out
B. upside down
C. folded
D. flat

46. Dissolve 5 tbsp. table salt in the mixture.
The underlined word means to make the table salt become ....
A. part of the mixture
B. more solid
C. colourful
D. frozen

Text 13
The following text is for questions number 47 and 48.

RECYCLING PAPER

Equipment:
Old paper, magazines, or newspapers
Blender/food processor
Bucket
Insect screens/strainers
Wire
Bleach
White glue
Iron
Water

Directions:
First, shape wires into a rectangular shape.
Then, cover the wire frame with insect screens and sew it.
After that, rip the paper into small pieces.
And then, put the torn paper in a bucket and fill it with warm water.
Add one table spoon of bleach.
Soak the paper for a half an hour.
Next, put a cup of soaked paper in a blender, add some bleached water and blend it.
And then, pour the blended paper in a large rectangular container. e.g. sink or tray.
After that, repeat step 5 and 6 until all of the soaked paper are blended.
Then, add and mix two table spoon of white glue to the blended paper.
After that, dip the screen frame into the blended paper. Lift and rinse the water for a minute.
Then, dry the paper (with the screen frame still on) in the sun. And then, peel the papers out of the frame screens when it’s dry.
Finally, iron the paper.


47. What do you learn from the text?
A. How to shapes wires
B. How to rip paper into small pieces
C. How to recycle paper
D. How to bleach paper

48. Soak the paper for a half an hour.
What does the underlined word mewan?
A. to make something completely wet
B. to make something completely dry
C. to put something quickly into liquid and take it out again
D. to tear something often suddenly or violently

Text 14
The following text is for questions number 49 and 50.
Snow Globes
Glue a small object to the inside of the lid - a plastic figurine, f, etc. Add glitter, beads, or foil confetti, etc. Fill the jar with equal parts water and corn syrup, add food colouring if desired. Seal the lid onto the jar using a watertight sealant (the kind used for aquariums, or the stuff found in the plumbing section of your hardware store). Put a bead of sealant on the threads of the jar and on the inside threads of the lid. Close it up, leave overnight to dry.
49. Which of the following is not needed to make Snow Globes?
A. wire C. thread
B. glue D. mixer

50. Why do you have to leave it over night?
A. to cool off C. to blend
B. to heat D. to dry

Hasil (Bahasa Indonesia) 1:

32. "menyambung kabel audio (jika berlaku)."Kalimat menyiratkan...A. Anda tidak dapat mengubah komputer pada sebelum menghubungkan kabel.B. CD-ROM Anda mungkin tidak bekerja dengan benar jika Anda tidak menghubungkan kabel.C. hal ini tidak diperlukan untuk menghubungkan kabel jika tidak validD. Instal ulang CD-ROM jika Anda tidak tersambung kabel.33. "Hubungkan kabel IDE ke drive."Kata 'drive' dalam kalimat mengacu pada...A. CD-ROMB. jumperC. motherboardD. komputer34. "hati-hati geser drive ke Teluk kosong dan gunung itu."Kata 'bay di kalimat serupa dalam arti...A. jumperB. kabelC. tombolD. kompartemen35. Pasang komputer kembali ke stopkontak dan kemudian matikan power on.Kata 'outlet' dalam kalimat serupa dalam arti...A. tombolB. channelC. kabelD. portTeks 9Teks berikut ini untuk pertanyaan nomor 36-38.Mencetak File1. mengubah printer pada.2. Buka file yang ingin Anda cetak.3. Klik "File". Dan kemudian klik "cetak".4. memeriksa apakah nama printer yang sama seperti yang Anda akan menggunakan. Jika hal ini tidak sama, kemudian mencari nama printer yang Anda akan menggunakan dengan meng-klik segitiga kecil atau panah di samping itu.5. Klik "halaman" dan masukkan halaman yang ingin Anda cetak.6. Pilih jumlah salinan yang ingin Anda cetak dengan mengklik panah di samping itu.7. Klik "OK" atau "Cetak".36. teks adalah tentang bagaimana...A. menyimpan file C. mencetak fileB. Buka file D. menghapus file37. Bagaimana kita membuka file?A. hanya dengan menyalakan printer.B. hanya dengan mengklik "File"C. hanya dengan mengklik "Print"D. hanya dengan mengetik Halaman38. apa yang harus kita lakukan jika nama printer tidak sama seperti yang kita akan menggunakan?A. pencarian untuk nama printer yang kita akan gunakan dengan mengklik pada segitiga kecil atau panah di samping ituB. memilih jumlah salinan yang ingin Anda cetak dengan mengklik panah di samping itu.C. Klik "halaman" dan masukkan halaman yang ingin Anda cetak.D. mematikan printer.Teks 10Teks berikut ini untuk pertanyaan Nomor 39-43Menghubungkan JetFlash (flash disk) ke komputer1. Pasang JetFlash langsung ke port USB yang tersedia di komputer desktop atau notebook.2. ketika JetFlash berhasil terhubung ke komputer, JetFlash LED akan menyala. Removable Disk drive * dengan huruf drive baru ditetapkan menunjukkan JetFlash akan muncul di jendela My Computer. Selain itu, sebuah ikon Removable Hardware dan ikon Menu cepat (asalkan Anda setup JetFlash elite) akan muncul di Windows System Tray3. setelah JetFlash terhubung ke komputer, Anda dapat mulai mentransfer data ke JetFlash hanya drag dan drop file atau folder langsung ke ikon Removable Disk yang mewakili JetFlash.39. Apa Apakah teks ceritakan?A. The steps to install the JetFlash .B. The steps to uninstall the JetFlash .C. The steps to install QuickMenu of the JetFlash.D. The steps to copy files and folders to the JetFlash.40. Where do we plug the flash disk?A. Into the IDE port.B. Into the power slot.C. Into the USB port.D. Into the power outlet.41. What indicates that the JetFlash is successfully connected to your computer?A. The JetFlash ‘s LED will light up.B. The computer is restarted automatically.C. The computer is removing the data to the JetFlash .D. The Auto Log In of the JetFlash is running.42. In addition, a Removable Hardware icon and an icon Quick Menu (provided you setup JetFlash elite) will appear in the Windows System Tray.”The sentence implies …A. If the icons do not appear, you must reinstall the JetFlash elite.B. If the icons do not appear, you must check your hardware configuration.C. In some computers with different operating systems, the icons may not appear.D. You must install the icons so that the icons may appear in the Windows System Tray.43. “In addition, a Removable Hardware icon and an icon QuickMenu (provided you setup JetFlash elite) will appear in the Windows System Tray.”The word 'icon' in the sentence is similar in meaning to ....A. port B. symbolC. cableD. driveText 11The following text is for question number 44.CD BOWLSMaterials:Old CDsHair dryer/ovenMetal bowlGlueSmall saucer/something to cover the CD holeDirections:First, place the CD in a metal bowl and heat it with a hair dryer. Or put it in the ovenon low heat. Then, bend the CD softly when it softens. After that, let it cool off.Finally, glue a small plastic saucer or anything to cover the hole.44. What is the hair dryer for?A. to place the CDB. To bend the CDC. Yo cool off the CDD. To heat the CDText 12The following text is for questions number 45 and 46.Tie Dyeing Old T-shirtThings you need:Old cotton T-shirtLarge thread or rubber bandCloth dyeBucketSteps:1.Wash the cotton T-shirt.2.Place the wet shirt flat on the work surface.3.Tie knots in the T-shirt, or twist it and secure the folds with rubber bands or heavy-duty thread.4.Mix 1/2 c. liquid dye (or 1 package powdered dye) in 1 qt. hot water. Dissolve 5 tbsp. table salt in the mixture.5.Let the mixture cool to room temperature.6.Put the entire shirt in the dye and let it soak for at least 20 minutes.7.Rinse the shirt in cold water until the water runs clear.8.Undo the knots and rinse the shirt again.9.Hang the shirt to dry, under the sun.45. How must we place the wet T-shirt?A. inside outB. upside downC. foldedD. flat46. Dissolve 5 tbsp. table salt in the mixture.The underlined word means to make the table salt become ....A. part of the mixtureB. more solidC. colourfulD. frozenText 13The following text is for questions number 47 and 48.RECYCLING PAPEREquipment:Old paper, magazines, or newspapersBlender/food processorBucketInsect screens/strainersWireBleachWhite glueIronWaterDirections:First, shape wires into a rectangular shape. Then, cover the wire frame with insect screens and sew it. After that, rip the paper into small pieces. And then, put the torn paper in a bucket and fill it with warm water. Add one table spoon of bleach. Soak the paper for a half an hour. Next, put a cup of soaked paper in a blender, add some bleached water and blend it. And then, pour the blended paper in a large rectangular container. e.g. sink or tray.After that, repeat step 5 and 6 until all of the soaked paper are blended. Then, add and mix two table spoon of white glue to the blended paper. After that, dip the screen frame into the blended paper. Lift and rinse the water for a minute. Then, dry the paper (with the screen frame still on) in the sun. And then, peel the papers out of the frame screens when it’s dry. Finally, iron the paper.47. What do you learn from the text?A. How to shapes wiresB. How to rip paper into small piecesC. How to recycle paperD. How to bleach paper48. Soak the paper for a half an hour.What does the underlined word mewan?A. to make something completely wetB. to make something completely dryC. to put something quickly into liquid and take it out againD. to tear something often suddenly or violentlyText 14The following text is for questions number 49 and 50.Snow GlobesGlue a small object to the inside of the lid - a plastic figurine, f, etc. Add glitter, beads, or foil confetti, etc. Fill the jar with equal parts water and corn syrup, add food colouring if desired. Seal the lid onto the jar using a watertight sealant (the kind used for aquariums, or the stuff found in the plumbing section of your hardware store). Put a bead of sealant on the threads of the jar and on the inside threads of the lid. Close it up, leave overnight to dry.49. Which of the following is not needed to make Snow Globes?A. wire C. threadB. glue D. mixer50. Why do you have to leave it over night?A. to cool off C. to blendB. to heat D. to dry